GANESHA+ Aluminum Long Rear Carrier Ver.3 for CT125 JA55/JA65 | GC-CT002A3
GANESHA+ Aluminum Long Rear Carrier Ver.3 for CT125 JA55/JA65 | GC-CT002A3
GANESHA+ Ver.3 aluminum long rear carrier for the Honda CT125 (JA55/JA65). The listed weight is approximately 3 kg, around 1.38 kg lighter than the stock carrier. See below for dimensions and installation notes for aftermarket suspension.
Our popular Long Carrier Ver3 (JA65, JA55)
1.38Kg lighter than the stock one!
Changes
Round bars inside for improved design
Improved ease of installation (screws are easier to tighten)
"Make your travels more enjoyable with GANESHA⁺ Long Carrier"
Design plus practicality
Aluminum version of the long carrier achieves sufficient strength and reduced weight
Special coating makes it rust-resistant! Scratch-resistant! One of the largest load capacities for a custom carrier.
It's tough gear that matches the design concept of center carriers and crash bars.
We've also made the carrier handle lower to prevent it from hitting your buttocks.
*This carrier was developed based on Honda's genuine suspension.
If you are using aftermarket suspension, please adjust with washers, etc., before installation.
Overall length 500mm, overall width 355mm (genuine carrier:overall length 477mm, overall width 409mm)
Weight 3kg (stock carrier is4.38kg) 1.38Kg lighter
Designed by GANESHA⁺ in Japan
This product was planned in Japan.
Introduction Video (Old Version)
Disclaimer
- Installation and use of custom parts are at the purchaser's own risk. Scratches or damage occurring during installation or use are not covered by warranty under any circumstances.
- Adding custom parts may void the motorcycle manufacturer's warranty.
- Adding custom parts may change balance and air resistance, potentially affecting riding performance, but any such effects are not covered by warranty.
- Using larger tires may also affect fuel efficiency and acceleration.
Couldn't load pickup availability
